Swivel hoist ring have choose special alloy steel forging and High Strength Quenched and tempered after treatment. It has superior mechanical property.
Product Name: Internal ball bearings swivel hoist ring YD083
Load: 230°Pivot, 360°rotation
Application: Unclear Power, Wind Power, Tool & Die Makers and traditional lifting Industry.
Usage: Lifting at vertical direction with largest WLL
Assemble with multiple swivel hoist ring, the steel rope angle less than 120°
Assemble with multiple swivel hoist ring, the WLL slightly lower or more
Assemble with multiple swivel hoist ring, side pull have the same WLL with vertical pull.
Metric thread : from M 8 to M 100 as standard; for loads from 0,3 t to 40 t
UNC thread: from UNC 5/16’’ to UNC 4’’ as standard; for loads from 661 lbs to 88,184 lbs
Safety factor: 4:1
Swiveling under load, usable for any kind of lifting operation, two ways of tightening
Swivel hoist rings are widely used in the field of wind power generation to facilitate and effectively solve lifting problems
Side-pull swivel hoist ring have choose special alloy steel forging and High Strength Quenched and tempered after treatment. It has superior mechanical property.
180° Pivot, 360° rotation, automatically adjusted with the direction of tensile stress angle.
Multi directional loading with 4 times safety factor.
Available on demand for WLL range (M8-M48, 0.3-20T) choose of standard metric thread, metric fine thread, UNC,UNF thread, BSW(British standard Whitworth thread) and so on.